Skip to main content

Slice 1.0 Base FW not supporting cal dates

Comments

1 comment

  • Chris Balogh
     
    Chris Balogh less than a minute ago (assign)
     
    Hi Kate,

    My apologies for dropping the ball here. I had built the firmware and changed the cal date utility in October to account for the base cal date. I'll have SQA work with the firmware and get an ECO started when they are finished testing. The new version is 00M3 with the cal date attribute registered. The version will be 00P4.

    Chris Balogh | SW Engineering Department Manager | DTS
    1720 Apollo Court, Seal Beach, CA 90740 USA
    o: +1 562 493 0158 x148
    chris.balogh@dtsweb.com | www.dtsweb.com

    -1

Please sign in to leave a comment.

Powered by Zendesk