Intrepid Control Systems neoVI FIRE 2 Multi-Protocol Vehicle Interface & Data Logger
Information about the Intrepid Control Systems neoVI FIRE 2 Multi-Protocol Vehicle Interface & Data Logger unit can be found at the following location:
https://store.intrepidcs.com/neoVI-FIRE2-p/neovi-fire2.htm
User's Manual used for development of the Rugged CANBox Enclosure:
- neovi_fire2_ug
In order to use the neoVI FIRE 2 logger, users will have to have a copy of Vehicle Spy 3 Professional (VSpy) with a valid license:
https://store.intrepidcs.com/Vehicle-Spy-p/vspy-3-pro.htm
DTS IS NOT RESPONSIBLE FOR SUPPORT OF THE INTREPID NEOVI FIRE 2 DATA LOGGER. ALL SUPPORT NEEDS FOR THIS SYSTEM NEED TO BE DIRECTED TO INTREPID CONTROL SYSTEMS.
Comments
1 comment
NOTE: As of 11 Dec 2018, Use Vehicle Spy 3 Professional (VSpy) Version 3.8.1.97
Later version 3.8.2.111 has a bug that prevents the EMISC I/O lines from working properly (EMISC1+2 can be used to trigger the sending of CAN Bus messages and to flag CAN Bus message replies... these may be recorded as Digital Inputs).
Please sign in to leave a comment.