TDAS Control - Tdas.ini filter settings for G5-HB

The TDAS G5-HB supports higher hardware anti-alias filters than the standard G5 or TDAS PRO SIM. The examples below are specifically tailored to the G5-HB when it is not used in conjunction with standard TDAS G5 or the TDAS PRO SIM. The following lines have been edited from a typical tdas.ini file:

• G5 Max Adj Filter = 30000 (The maximum hardware anti-alias filter frequency)
• Valid Sampling Rates (sample rates above 100000 have been removed as the G5 is limited to 100k sample rate)
• Corresponding Variable Filter Cutoffs (filter cutoffs listed have been tested. The cutoff for sample rates from 40k to 100k are different from the typical INI)

---- PRO Fixed AntiAlias Filter, G5 Max Adj Filter Setting ----
4300, 30000
---- Valid Sampling Rates ----
250.0,500.0,1000.0,2000.0,2500.0,5000.0,8000.0,10000.0,12500.0,20000.0,25000.0,38000.0,40000.0,50000.0,60000.0,75000.0,100000.0,-1.0
---- Corresponding Variable Filter Cutoffs (0 = PRO: No Adj Filter, G5: Max Adj Filter) ----
50,100,200,500,500,1000,2000,2900,2900,2900,3620,3620,10000,12500,15000,20000,30000,30000,-1----

A sample INI file is attached for reference. Submit a request or contact DTS for additional information.