TDAS Control - SIF Sensitivity Fields (v7.1.2r)

New placeholders are now included in the saved SIF with TDAS Control (TDC) v7.1.2r and later.

Values will appear in the sensitivity line of the SIF file when viewed with Notepad as below 

---- Sensitivity (mV/V/eng unit) ----
1.62360000,-0.475600,0.00000261100,-0.004554000,3.246513000,-874.010000000,0.000000000,0.000000000

The additional sensitivity values are used for the IRTRACC exponent and the polynomial equations for the chest potentiometer. 

When a SIF is saved or created from a CSV sensor database, these values will be populated. They will have no effect on SIFs that use the "Normal" category

---- Sensor Category (Use 0 for most sensors) ----
0

• Normal = 0
• Potentiometer = 1
• IRTRACC = 2
• Polynomial = 3