Q: Will a level trigger on a SLICE PRO SIM initiate the trigger output of the TDM?
A: Any EVENT input to a controller (ECM or USB) or a level trigger on a module (SPS), will pass through the SLICE PRO Chain and initiate the TRIGGER OUTPUTS of the TDM.
0
Travis Ralston
Edited
The Trigger Distributor cannot work as a function generator:
The frequency and timing is fixed as described on page 5 "Trigger Outputs"
The voltage can only be 0 to 5V or 5 to 0V as described in Appendix "A" page 10.
The digital outputs of the SLICE PRO TOM can be set to individual delays and durations. The output types are the same as the Trigger Distributor.
0
Yi Cheng
About programmable event signal,
Could these 6 CHs be individual setup as several square waves, and able to set up the frequency; duration; voltage?
Comments
3 comments
Q: Will a level trigger on a SLICE PRO SIM initiate the trigger output of the TDM?
A: Any EVENT input to a controller (ECM or USB) or a level trigger on a module (SPS), will pass through the SLICE PRO Chain and initiate the TRIGGER OUTPUTS of the TDM.
The Trigger Distributor cannot work as a function generator:
About programmable event signal,
Could these 6 CHs be individual setup as several square waves, and able to set up the frequency; duration; voltage?
Article is closed for comments.