User's Manual - SLICE PRO Trigger Distributor (TDM) Travis Ralston March 09, 2018 18:19 Updated User Manual - SLICE PRO Trigger Distributor (2018-03).pdf 2 MB Download Related articles User's Manual - SLICE PRO Timed Output (TOM) User's Manual - SLICE PRO Ethernet Controller (ECM) User's Manual - SLICE PRO Field Cable Drawings - SLICE Distributor Datasheet - SLICE PRO Timed Output Module (TOM) Comments 3 comments Sort by Date Votes Patrick Puzzuto June 16, 2016 21:26 Edited Q: Will a level trigger on a SLICE PRO SIM initiate the trigger output of the TDM? A: Any EVENT input to a controller (ECM or USB) or a level trigger on a module (SPS), will pass through the SLICE PRO Chain and initiate the TRIGGER OUTPUTS of the TDM. 0 Travis Ralston November 30, 2016 20:40 Edited The Trigger Distributor cannot work as a function generator: The frequency and timing is fixed as described on page 5 "Trigger Outputs" The voltage can only be 0 to 5V or 5 to 0V as described in Appendix "A" page 10. The digital outputs of the SLICE PRO TOM can be set to individual delays and durations. The output types are the same as the Trigger Distributor. 0 Yi Cheng November 28, 2016 03:39 About programmable event signal, Could these 6 CHs be individual setup as several square waves, and able to set up the frequency; duration; voltage? 0 Please sign in to leave a comment.