Windows 7 Settings for TDAS Control

If you have the Hardware Discovery Enabled in TDAS Control, you will need set  TDAS Control to Run As Administrator. Hardware Discovery uses a Broadcast Ping to locate TDAS hardware on the local subnet. Windows 7 and later blocks the Broadcast Ping unless the software has Administrator privileges.

If you don't have administrator privileges, contact your IT department. The procedure is as follows:

1. Right click the shortcut or .exe icon for your software
2. Choose "Properties" and select the "Compatibility" tab
3. Click "Change settings for all users"
4. 
5. Check the "Run this program as administrator" box and click "OK"
6.