The SLICE PRO SIM has several bandwidth options. In the table below: the 8-pole fixed filter is the maximum bandwidth. Each SPS has a software selected 5-pole adjustable filter from 50Hz to 45kHz. The programmable filter can be bypassed to use just the fixed filters.
| Bandwidth Option | 8-pole Filter (fixed) | 5-pole Filter (adjustable up to 45 kHz) |
| Automotive (standard) | 4 kHz (for rates ≥20 ksps) |
for rates <20 ksps |
| High | 100 kHz (for rates of 500 ksps or 1 Msps) |
for rates <500 ksps |
| Maximum | 200 kHz (for rates of 500 ksps or 1 Msps) |
for rates <500 ksps |
SLICEWare has a default ratio of sample rate to filter frequency, and is specified in the configuration file. The default ratio is 5:1, i.e. if you select a sample rate of 500ksps, the filter will be set to 100kHz. Specific sample rates may be overridden with an alternate entry in the config file. The user requested sample rate is communicated to the SLICE PRO firmware. If the requested rate is within the range of the adjustable filter it is selected directly. If the rate is above the adjustable max, but below the first fixed filter the first fixed filter is selected. Otherwise the second, higher fixed filter is selected.
Comments
0 comments
Article is closed for comments.